It eventually got indexed and got pretty trashed.  In the same vein as why I had started it, I secured it with various means (only registered users could post, simple captcha to create account) cleaned it up, and it had a long quiet life of it’s own with a few actual changes that were worthwhile. Every blue moon someone would put some spam on the site which was easy enough to clean out manually.

For several years it was easy enough to maintain with the manual method. At one point, I decided to go ahead and host my domain(s) so I embarked on another learning process from moving some existing web services (WordPress, Mediawiki, MyTinyToDo, etc.) with data from a locally managed “server” to a hosted one. Again, I kept the database intact and made the migration transparent just for the sake of a learning exercise.

Recently, my captcha must have been broken as in just a few days it logged up hundreds of changes which were almost entirely spam and link farms. I kept all the data and the database, but it will probably just wither away and die eventually.

As a side note, who knew that captcha was an acronym for “Completely Automated Public Turing test to tell Computers and Humans Apart”

So for several years and several providers (Verizon DSL, Comcast Cable, and until recently Time Warner Cable), I’ve been running a small laptop as a web host.  It runs WordPress, Mediawiki, some static pages, and some other applications that I use (like MyTinyTodo).  I’ve also used it to host FTP for large files that I couldn’t attach to an e-mail, and many many other uses. It has proved a geeks invaluable tool. I used dyndns.org to keep up with any IP changes (which has happened a total of three times in five or six years). Now my upstream traffic is tiny and is probably not even noticed. The site gets very few visitors and viewing my web stats only a few MB per day worth of traffic. It was nice to have the ability to reach my home from the public internet.

Recently due to some changes, Time Warner has blocked incoming connections to my little server (I can’t even SSH to my home anymore) (and reading their fine print on their service they do not allow users to “run servers”). So while this pisses me off, I’m actually getting ready to physically move (again) from NC to NY so was considering hosting my sites anyway.

I went with the super budget hosting (iPage.com). In the event that I don’t like it, I can pay for a more expensive hosting solution, but I just needed basic transfer, MySQL, PHP5 and some tools to manage it with.  I also took good notes on things that worked and things that didn’t and kept good backups of my work and will continue to take backups of databases and file structure so I can move easily.

I didn’t transfer my domains, just updated their nameservers to the new hosting company. This in essence commoditized hosting as I can move at will to the provider which provides me what I need at what I am willing to pay (granted there is some elbow grease involved in the process).

Here is what I had to do:

Static Files – FTP them to the correct directory, point the subdomain to that directory, update nameservers on the Domain Manager on GoDaddy.

WikiMedia – a little more complex and I possibly could have simplified things – install new version of WikiMedia (create database, etc.), perform export on old server, perform import on new server, point subdomain to correct directory, update nameservers on GoDaddy. I also moved the extensions by simply moving the extension directory over and adding the extensions in LocalSettings.php … there are some files that I will move manually and one of my extensions isn’t working properly (probably a version issue with the new version of MediaWiki, but I bet I can fix that one by hand (sometimes coding is actually fun)).

MyTinyTodo – expand tar file, move database (export from old server, import to new server), run setup … super easy, point subdomain to correct directory

WordPress – followed instructions here – there were some limitations on the size of the SQL Import on my new hosting company (via their phpMyAdmin version) so moving the database had to happen in parts (the one large table had to be broken up into 8MB segments (I just used vi)), but it’s done now – point subdomain to correct directory, copy MX records and some other domain specific (subdomain) information from my old nameservers (dyndns.org) to the hosting company, update nameservers on GoDaddy.

Overall it was not too complicated. If you are methodical about the process you can move from one hosting company to another with little trouble and minimum downtime (or like I did from your own host to a hosted solution).

On my Macs I’ve been mostly happy with Firefox, but I have to admit that it is slow.  When Safari 4 came out I tried the beta and was pretty happy with it and only had a few unexplained crashes and only one of those caused me to lose some work (ironically, I was editing a WordPress entry when it crashed). I found myself using Firefox for the extensions (namely Delicious). Since the official release of Safari 4, it has become my primary browser on my Macs. The reason being speed; it is noticeably faster than Firefox. I even downloaded it on my PC so when I happen to have booted to Windoze, I run Safari.

I recently discovered DeliciousSafari and a few other extensions which work on my mac so I’m moving even further away from Firefox.

If Firefox wants to win me back, it’s got to do something about the speed. I notice it more and more now that I’m used to how fast Safari starts up, renders pages (cover flow, hot sites), etc.

On the anti-Microsoft movement, more recently than what I described in the first paragraph, I’ve tried to ditch Microsoft more and more (even though I am using Apple’s products, I just don’t get the evil vibe from Apple (but it may be coming)).  For instance, I have several computers in my office and only run Windoze when necessary. My PCs are running Ubuntu and my Macs are running OS X.  I do have to boot to Windoze on my gaming machine to play games, but that’s really the only time I’m running Windoze.  I don’t use MS Office as there are alternatives (iWork, OpenOffice, Google Docs) that work well and only open documents in MS Office if I’m concerned that an export for a co-worker or client may have gone amuck.

The battery life, while I do get a solid 5 or 6 hours of constant use out of it, could be a bit longer. The 1000HE looks to fit that bill with an advertised 9 hours. I bought a car charger for the EeePC on eBay for $8 + $3 S&H have have charged it in the car a couple of times while on the road.

The WiFi on the EeePC works as well as my MacBook Pro and much better than my wife’s Dell Inspiron Laptop.

I’ve adapted to the keyboard, but I do have to agree with those that say it is tiny. I have only used OpenOffice to draft a document a few times because typing more than a page of text is cumbersome. If it was my only computer, I could live with it, but when I need to create some serious content, I usually just use one of my Macs.

I did have one other problem, which because I purchased it from Amazon was not as big a problem as it could have been. I had a hardware issue with the video card on the mother board (at least that’s what my experience indicates (and Asus Technical Support agreed)). Asus said I could RMA it and they would either fix it or send me a new one but I would be without it while they made that determination. They suggested that I use the return policy of who I bought it from. The Amazon return policy is great. They shipped me a new one. I just had to ship my initial EeePC back within 30 days. This gave me plenty of time to compare them head-to-head and to copy settings, content, etc. from the defective one to the new one.

Before doing that I compared the default Fedora install and Eeebuntu. The Fedora install boots and wakes from sleep much faster. Opening applications on them is identical and I didn’t notice any incompatibilities on the internet or using hardware between the two. I’m hoping that Jaunty will catch up (one of the core improvements in Jaunty will be boot and wake speed).

Overall, I’m very pleased with the purchase. I really like Eeebuntu but I may be jaded as I run it on several other PCs and like to tinker under the hood. I also recommend upgrading the memory to 2GB for any operating system you are running if you plan on multi-tasking (or running Tweetdeck with a memory leak over a weekend).

To be honest, the solution was all over the forums, but none of the posts specifically mentioned the 901. I spent a few hours trying different things and eventually got the settings about where I want them. The trick was that all the steps in this post need to be followed. The post indicates that this works for the 900 as well, but YMMV.

The trackpad seems responsive, yet not overly so,  it’s not jumpy (as it was with just the elantech driver), and I even have both vertical scrolling on the side of the trackpad and two finger scrolling as well.

Here’s the steps that I performed (these are pretty much identical to the post, but I’ve added some dialog):

The first step is to enable the driver module in the kernel. To do this create a file in /etc/modprobe.d called eeepc and enter the following line in the file:

options psmouse elantech=1

I rebooted for the module to load. I noticed upon rebooting that the mouse was very jittery and it was hard to make small moves.

Next I created a file named shmconfig.fdi in /etc/hal/fdi/policy and entered in the following text:

<?xml version=”1.0″ encoding=”ISO-8859-1″?>
<deviceinfo version=”0.2″>
<device>
<match key=”info.product” string=”ETPS/2 Elantech Touchpad”>
<merge key=”input.x11_options.SHMConfig” type=”string”>True</merge>
<merge key=”input.x11_driver” type=”string”>synaptics</merge>
</match>
</device>
<device>
<match key=”info.linux.driver” string=”psmouse”>
<merge key=”input.x11_options.SHMConfig” type=”string”>True</merge>
</match>
</device>
</deviceinfo>

I rebooted again to load the driver in gnome. The trackpad was still jittery, but I was now able to adjust sensitivity in Prefereneces -> Mouse. I also noticed that I had lost two finger scrolling at this point.

Now, to fix the tap while typing problem you have to run the following command (which will run as a deamon):

syndaemon -i 0.7 -d -t -K

Now the tapping while typing problem is no more. To run this command on gnome startup you can put it in the session manager by running gnome-session-properties from the command line and entering the following:

Name: Synadaemon
Command: syndaemon -i 0.7 -d -t -K
Comment: Disables touchpad 0.7 second while typing

As such:

Now that I had the typing and tapping issue solved, I wanted to get the two finger controls back. To do this you need to install the installed gsynaptics-elantech package through apt-get or synaptic. Once installed two finger scrolling works and there is a new application in Preferences with which you can configure the touchpad to your specifications.

Happy typing with no tapping

I’ll attempt to describe all that I had to do to get it installed and go into some of the customizations or additions I’ve made and why.

Installing Eeebuntu was not very difficult but I did have a few challenges and even did a re-install to change the default partitioning to use both SSD drives.

The first problem I came across was that I could not boot from the USB stick I created using another Ubuntu box I had which is running 8.10. I changed the settings in the BIOS to boot from the USB stick first, but it still wasn’t booting. I read online that if you press ESC during the initial splash screen that you can choose the boot device, which is true. However, even when I did that and selected the USB stick it still wouldn’t boot from the USB stick.

I had an old PC that I was cannibalizing for parts and I had a USB to IDE adapter (which has come in handy before), so I took the old DVD player out of my old PC and used that to install Eeebuntu NBR (2.0).

During the install, the GUI in which you make all your selections in is larger than the screen so the Back and OK buttons can not be reached. That was  easy to overcome, but is nevertheless a minor annoyance.

My first install was just accepting the defaults and went very smooth. The machine came up clean and I poked around for a while. The main issue I had with the default install and using the “Guided” partition setup is that it installed  the entire system on the larger of the two SSD drives on the system (the 901 Linux version comes with two SSD drives, a 4GB and a 16GB). It didn’t even format or mount the second SSD. I decided that I would reinstall the system and put everything but the /home directory (and swap) on the 4GB drive. I also called my local PC store and they said that a 2GB upgrade for my EeePC was only $34.99 so I ran out and picked up the memory.

The memory install was a snap and not even worth going into.

For the second install I put the / mount point on the entire 4GB disk, created a 15GB primary partition for the /home directory and left the remainder of the second SSD drive for swap in a logical partition (I think it was just under 1GB).

The first problem I came across was during the system update, I was getting a message that some of the repositories had an unknown public key and therefore were not being updated. I think this was an oversight of the Eeebuntu repository so I did some searching and determined that I had to add the key for that repository:

sudo gpg --armor --export <INSERT KEY HERE> | sudo apt-key add -

After this, all updates completed successfully.

I have to say that I really like NBR launcher. It’s slick and easy to customize. It works very well with the EeePC form factor. I like the Eeebuntu distro much more than the OOB Xandros distribution, but there are some tweaks that have to be added if you want to use some of the hardware features.

The next step was to install the eee-control tool set and set it to load on restart. The eee-control tools allow you to assign actions to the silver hotkeys, turn on and off hardware (wifi, bluetooth, webcam, SD card reader), and control the system performance mode (which is a requirement, in my mind, to take advantage of the Atom processor and get decent battery life). To add the eee-control system tray icon add an entry to the Session in the Control Center.

Once I was satisified with my install I installed the following applications:

1. Gnome Do
2. Skype
3. Songbird
4. Gnome games
5. Tomboy

I removed:

1. Banshee
2. Gnome PPP and other PPP utilities
3. gtkpod and other iPod utilities

Overall, the installation process was not unexpectedly difficult based upon prior experience with Linux (I started with Slackware and kernel 0.82 in 1993) and Ubuntu. It’s still not Windoze but I doesn’t come with all the problems that you get with Windoze.

My biggest gripe at this point is the trackpad issue. The trackpad is super sensitive and it’s very easy to inadvertantly touch it with your thumb when typeing (even more so with this form factor as the keyboard is tiny and one thumb has to be tucked under the other while typing). I tried several options that I found on the eeebuntu forums including uninstalling eee-control and installing eee-acpi-utilities, enabeling the kernel module for the elantech touchpad, and any combination of the above. I still haven’t found a solution to that issue, but I did revert back to eee-control and set one of the hotkeys to disable the touchpad. It’s a solution, but I would prefer to have  the option of disabling the touchpad while typing which is an option with the Xandros distro and workes with some of the other EeePCs that have a different trackpad.

I’ll continue to see if I can find a solution for the touchpad issue and post as soon as I do. If anyone has a solution for the 901 using Eeebuntu or easy peasy please let me know.

My first impression was that the damn thing was tiny, shiny and did I say tiny. I’ve been using it for a little over a week now and I am grabbing it from the computer room more often than sitting down at my desktop. I did take it to work with me as it fit  in my bag with my other laptop and didn’t add much weight nor was it too bulky in addition to the MacBook Pro and a few folders and notebooks. I haven’t traveled with it, but I’m sure it will make the rounds soon.

After a week of use here are my first impressions both negative and positive:

Due to it’s size, the first thing I noticed was the size of the keyboard. The reviews out there that say it is too small are valid. It took me a few days of typing on it to adjust and I’m still not near as fast as I am on a full size keyboard. The most difficult thing is symbols, capital letters, and entering in complicated passwords because the right hand shift key is tiny (as opposed to a double sized key, it shares the normal space with the up arrow and the shift is on right). I can’t say that the keyboard is a show stopper as I’m typing this blog entry on the thing and I also typed up the entry last night. I’ve also typed a dozen  e-mails and chatted with Skype and Pidgin (AIM).

The other main annoyance is the track pad is super sensitive to touching it while typing. So I’m often pecking away and the cursor is somewhere else in the text or on another window or button and I inadvertently hit the trackpad with my thumb and the focus moves or I start typing my text into somewhere else. I’m getting better at avoiding it, but I do end up hitting ctrl-z frequently to undo the last few letters I’ve typed somewhere else in this entry. I understand there is a utility that fixes this and disables the trackpad while typing and plan to look around for it, but I’ve installed Eeebuntu and I haven’t had too much luck finding a workable solution (I’ll post later on my experiences installing and using Eeebuntu and if I find a solution to this issue).

Given those main issues, I have to say that I really like the form factor. It works quite well sitting on my lap on the couch or even on my knees in bed (yeah yeah, I know….very sad (but true)). So despite the issues with it’s size, it’s what I wanted and is fitting the bill. I do have the alternative of my MacBook Pro as well as desktop machines if I need to do something that the size makes difficult.

The battery lasts for ever (some sites claim 8 hours but I think 7 is more likely). Just this morning, I surfed around on it over coffee and am sitting on the couch typing up this entry and I still have 5 hours and 50 minutes of battery (according to the power management app which has been pretty accurate to date). One of the reasons I looked at netbooks is that I saw someone using one in the airport recently. I had had my eye on the EeePCs for a while, but was still on the fence. I struck up a conversation with him and learned that on one or two night trips he didn’t even take his power supply, much less carry it in his briefcase (like I did with my current and previous laptops).

The SSD drive is nice as there is no vibration from the spinning. There is a fan, but it’s inactive most of the time and isn’t very noticeable even when running.

So those are my first impressions on the usability. I’ll post another entry later with my experiences upgrading the RAM to 2GB (why not spend $34.99), installing Eeebuntu, installing applications, file sharing with other machines and other issues dealing with hardware, compatiability, and the Eeebuntu useability.

I was torn for a while as I already have an iPhone that handles just about anything I would do on a Netbook with the exception of document editing.  The iPhone, though tiny, is very nice for checking e-mail just about anywhere and sending back the short replies that we have become so familiar with since the days of clam shell pagers, Blackberries, and now iPhones (and other small e-mail devices).

Another reason I was torn for a while on the idea of a Netbook is that I have a laptop that I use for business and for business travel I usually lug it around. It’s not an aircraft carrier of a laptop (it’s not a 17 incher) but it’s still large and can’t just be chucked in a suitcase or backpack. I don’t like carrying it on personal weekend trips or even longer personal vacations but often find myself doing it just so I can keep in touch (even if I’m not “technically” going to be working while away from home.

Granted there are smaller full use laptops available, but since I don’t have an actual desktop at work, I think I need my 15″ Macbook Pro as I like the screen real estate and I also like the full size keyboard since I’m often writing several hours per day.

Even considering that I already have a laptop and an iPhone I often found myself reading reviewes and comparisons of the eeeeeeeeeeeeePC, Wind, Aspire One, and others. I think the coup de grace was when I actually got my hands one. I was traveling recently saw someone using an eeePC surf in the airport. I am usually an intravert but I just asked the user how he liked it. He couldn’t stop praising it and said that it is the only computer he travels with.

Now that I’ve decided I want one, I don’t know which features are a must have for me.

• I am set on Linux as I can’t stand Windoze to begin with and on a lower powered Netbook it would drive me batty. I’ll probably put Ubuntu with NBR launcher on it anyway so don’t want to pay Microsoft for something that I’m not going to use anyway.
• I think I want SSD as opposed to a magnetic hard drive as think for having it on my lap the heat and spinning hard drive would bug me. I also don’t think I need that much space as I already have an iPod so I don’t know what large media files I would put on it.
• In regards to size (and this is the most difficult decision for me), I want one that is small but I don’t know if I want the smallest of the small. I’m seriously leaning towards the eeeeeeeePC 901, but it’s one of the tiny ones and from what I hear the keyboard is an issue. Why I’m torn is I want something that is usable.
• I also want something with a super long battery life. The reason for a UMPC/Netbook is mostly form factor and I don’t want to have to keep a power brick with me all the time. If I knew I had a solid 5 hours of use, I don’t even know if I would travel with a brick unless I knew I would be away from home for extended periods of time.

I’m open to suggestions. If you have a reason you love or hate your eeeeeeePC, AAO, Wind, or other Netbook drop me a comment with your experiences.

Specs:

• 12″ PowerBook G4 1.33 GHz
• 256 MB RAM
• 80 GB Hard Drive

I was able to replace the Hard Drive rather easily by following the instructions at iFixit. I wanted to do a compare of speeds of doing normal tasks so I tried to install Leopard, but after the DVD spinning for a few hours I learned that the minimum requirements for Leopard is 512 MB RAM.

I downloaded the PowerPC Port of Ubuntu Desktop 8.04 LTS and burned it to a DVD. I put it in the DVD drive and rebooted (as there was nothing on the Hard Drive I didn’t even have to force it to boot from the optical drive). It came up with the live image (basically running the OS off of the DVD Drive) but when I went to install it was painfully slow.  I figured I just didn’t have enough memory for the OS and the installation program (256 MB is not much memory at all). I did find that there is an alternate image which has a text based installer so I downloaded that and repeated the process.

The PowerBook came up clean with the text installer.  I accepted all the defaults and let it rip. It took a little over an hour for the install and the Mac came up with Ubuntu. The wireless card wasn’t working so I used the physical network and did a full update using the included update manager. After the update, the wireless card worked (I’m assuming it was an updated driver module in the kernel).

I’ve been playing with it for a few days. My only real complaint is that I seem to be stuck in 8 or 16-bit color mode (the desktop image has a series of concentric rings). I can’t really tell when browsing the web and images and videos look full color to me.  However, I’ve been browsing the Web, watching YouTube videos, and editing documents in OpenOffice Write and have been pleasently pleased with the speed.  If anyone knows how to get it into 24-bit color mode drop me a note.

The first order of business was to update my Mac and iPhone and they were pretty easy and benign (and the latest iPhone upgrade rocks).  I applied all the updates to several Windoze computers or Virtual Machines, and performed all the updates for the various flavors of Linux running around the house.  No problems with the basic updates.  Everything went as planned.

The next order of business was to upgrade my desktop to Ubuntu 8.10 (Intrepid Ibix) from 8.04 (Hardy Heron).  This didn’t go as smooth as I had hoped and was not as smooth as my previous experiences with Ubuntu release upgrades (I had even upgraded a virtual machine running on VMWare Fusion on my MacBook at work with zero problems).  It turned out that my video cards (it’s a gaming machine pulling double duty as an Ubuntu desktop) were configured in SLI and the driver installed with 8.10 didn’t support my cards (2x Nvidia GEForce 8600 GT).  It took quite a bit of messing around, but I finally determined I needed to download the latest (beta) driver from Nvidia, compile and install, and also make one change to the configuraion file (I needed to add a BusId “1:0:0″ line to the Device section of my /etc/X11/xorg.conf file).  This complete, I upgraded to OpenOffice 3.0, installed Songbird, Gnome Do, Avant, and a few other odds and ends.  Overall was not too big of a hassle, but I can imageine if I wasn’t familiar with downloading drivers and compileing them I would have been up a creek.  With that said, at least there were drivers…

Even though I had that problem with the desktop, I upgraded my MythTv box (Mythbuntu) and another Ubuntu desktop with no problems.  I decided to leave my Webserver (blackcow) as it is running Ubuntu 8.04 which is a LTS or Long Term Support release and the laptop isn’t doing much but sitting under my desk serving up the occasional blog entry.

I did upgrade my WordPress version on blackcow with no problems (which prompted me to write this blog entry).